Via Raspberry Pi Spy:
The OpenElectrons “PiPan” is a pan and tilt mechanism for the Raspberry Pi Camera Module. I’ve used the Pi camera in a few projects but this is the first bit of commercial Pi camera hardware I’ve had the chance to play with.
It consists of a kit which when assembled allows you to move your camera in both horizontal and vertical directions. To achieve this is uses two small servos and a control board which can be controlled using Python. It can pan 180 degrees (from left to right) and tilt 110 degrees (top to bottom) although I haven’t been able to test this yet.
Featured Adafruit Products
Raspberry Pi Camera Board – The Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. (read more)
Each Friday is PiDay here at Adafruit, be sure to check out our posts, tutorials and new Raspberry Pi related products. Have you tried the new “Adafruit Raspberry Pi Educational Linux Distro”? It’s our tweaked distribution for teaching electronics using the Raspberry Pi. But wait, there’s more! Try our new Raspberry Pi WebIDE! The easiest way to learn programming on a Raspberry Pi.
We now have Raspberry Pi Model B with 512MB RAM in stock and shipping now!Related