Stunning Halo 3 Costumes and Energy Sword

halo-title-pic

Adafruit Forum member JoshuaKane writes:

I wanted to share with everyone a project I worked on for a recent sci-fi/comic convention. I have always been a fan of fantasy, sci-fi and comics. A few months ago I started working on an Orbital Drop Shock Trooper (ODST) costume and weapon.

I wanted to make the sword something that would literally make folks stop in their tracks and take notice at a convention. For this I turned to the Arduino Microprocessor and some of the accessories developed at Adafruit.

The full idea is to give the impression of a pulsing energy sword. The perfect item to light this sword are the NeoPixel strips (60 LEDs per meter). The complete package is a sword that would light up when you turned it on, and play a sound indicating that it was switched on.…think Star Wars light saber. Once lit the NeoPixels would pulse from blue to purple to red, and back to blue. What weapon would be complete without sounds? To give the sword a more realistic look and sound we used the ADXL345 to be able to detect motion, this would trigger a sound event via the VS1053 breakout.

To complete the package I used 2x liPo 2600mAh batteries hooked in parallel through a UBEC to give a constant and clean 5v for the LED’s and controller.

The costume is designed by Sean Bradley, who also molded the sword parts out of PET Plastic and Resin. DragonCon photos were provided by Brian Humphrey.

Sword parts fresh out of the vacuum-former. These will be painted on the back side.
Sword body pieces fresh out of the vacuform machine. These will be painted on the inside.
Arduino Micro, ADXL345 accelerometer and VS1053 audio breakout board are concealed within the cast resin handle.
Arduino Micro, ADXL345 accelerometer and VS1053 audio breakout board are concealed within the cast resin handle.
All the pieces coming together. The bubble wrap is presumably used as an LED diffuser. Clever!
All the pieces coming together. The bubble wrap is presumably there as an LED diffuser. Clever!
Completed costumes, ready to wow onlookers at DragonCon!
Completed costumes, ready to wow onlookers at DragonCon!

 

 

 


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.