Greg Payne’s 3x3x3 LED cube project via etchingpathways.blogspot.com:
The basic concept is this; the cube, in this case 3x3x3, is made up of columns (9) and layers (3).On each layer, all the cathodes are connected together and in each column, the anodes are connected together. Therefore, 12 ouputs are needed to control all 27 LED’s.
By driving the layer output low and the column output high, the specific LED will turn on. Driving both the layer and column output low, will turn the LED off. By sequencing what LED is on when, you can draw different patterns. The bigger the cube, the better patterns can be drawn.
Each Friday is PiDay here at Adafruit, be sure to check out our posts, tutorials and new Raspberry Pi related products. Have you tried the new “Adafruit Raspberry Pi Educational Linux Distro”? It’s our tweaked distribution for teaching electronics using the Raspberry Pi. But wait, there’s more! Try our new Raspberry Pi WebIDE! The easiest way to learn programming on a Raspberry Pi.
We now have Raspberry Pi Model B with 512MB RAM in stock and shipping now!Related
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
No comments yet.
Sorry, the comment form is closed at this time.