MaterialMatters Series Covers Details About PLA Plastic #3DThursday #3DPrinting

Corn plastic e1375732369839 2

The MaterialMatters Series at the MakingSociety kicks off with a dedicated exploration of PLA Plastic, a very popular material for 3D Printing and other activities!

Main characteristics of PLA

Appearance

PLA comes transparent but can be coloured. It can be translucent or opaque depending on the degree wanted. Objects made in PLA have usually a glossy look.

Resistance and Solidity

PLA is more sensitive to environment than other types of plastic such as ABS. If put in the water for too long, your PLA product can slightly loose its colours. Because it melts at a low temperature (180°C), it is usually not recommended to use PLA products in a very hot environment. You may have experienced it when your stirrer gets deformed in your hot coffee. PLA is stronger than ABS and also a bit less flexible, which makes it less suitable for designs that clip and assembly. For more details about material properties of PLA, this link might be of great interest.

Post-finishing

PLA can be machined and sanded.

Is PLA easily biodegradable ?

The love for PLA comes from the fact that it’s biodegradable. If you look at it quickly, you may think it’s the perfect plastic of the future, made from nature and returning to nature. It’s actually a bit more complicated as PLA cannot be recycled in a home compost trash. It needs an industrial composting facility heated to 60 °C and the addition of digestive microbes to really disappeared.

There is actually only a very limited number of facilities around the world designed for degrading PLA, which means that it takes energy to bring the trashed products there. PLA products also tend to be confused for other types of plastics by the end users, and often end up in the general trash. Composting times can greatly vary, taking from 1 to 6 months in a commercial composting facility.

Is PLA always food-safe?

Many users of home 3D printers think that it’s 3D printed objects in PLA for food-related purpose: cups, eating ustensiles, juicers…. Don’t do it! 3D printed PLA is usually NOT safe. Filament of PLA goes through pieces of your 3D printer that contain lead, and PLA filament rolls sold for 3D printing are usually mixed with other materials. If you want to 3D print food-safe products in PLA, you will have to use pure PLA and a 3D printer made of stainless steel. With the rapid growth of 3D printing, PLA is gaining in popularity. Hobbyists love it for its green and low-cost qualities, professionals love it for its strengh and appearance.

3D printing

PLA is massively used by users of personal 3D printers using deposition modelling technique. PLA melts at a temperature of about 180°C and cools down faster than ABS, which means that no heated bed is needed. Because of its property (it heats up and cools down fast), PLA can be a bit more difficult to use at first than ABS. But it smells much better.

Casing for electronics

Even if it’s still really rare to find electronics casings made of PLA, a few products have been launched on the market, mostly for communication purpose (“look how green we are!”). Examples below were experiments from big brands such as Samsung, Fujitsu or Sony. They used PLA as a marketing tool, surfing on the “green tech” trend.

Read More.

PLA Pellets

PLA filament e1371260969567


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.