NEW PRODUCT – Compact Switching Power Supply – Selectable Output 3-12VDC

1448 Lrg

NEW PRODUCT – Compact Switching Power Supply – Selectable Output 3-12VDC. Wow, is this not the most useful thing you did not know existed or what? Its a switching wall adapter where you can easily change the voltage! It’s like a benchtop supply you can take with you anywhere.

1448Side Lrg

This model is 10 Watts and has 6 selectable outputs ranging from 3V to 12VDC and up to 1.5A output. It has a 2-prong plug, but takes 110VAC to 240VAC so you can use it anywhere with a simple plug adapter.

1448Conns Lrg

It comes with a range of tips, such as 2.5mm mono, 3.5mm mono, 5.5mm/2.5mm, 2.5mm/2.1mm, 4mm, etc. You could use this with just about any device or project, it’s very handy!

  • Multi changeable plug DC-cord.
  • Universal AC input 100V to 240V, 50Hz/60Hz
  • Universal AC input plug available (BSI, USA, Europe, Aust)
  • 6 selectable outputs: 3V-12V MAX. 1500mA.
  • Over load, over current, over heat protection.
  • International approval CE EN60950, UL1950, CSA22.2 No.950.
  • EMC approval EN55022.
  • Extra low consumption during standby (about 8% of linear adapter).
  • Weight: 86g approximately.
  • Small size: 67x29x74mm.
  • Cable length: 1.54m / 60 3/4″
Below is the voltage current table and avoid higher loads!
Rate output Voltage 3V 4.5V 6V 7V 9V 12V
Max. output current at 220V 1.5A 1.2A 1.0A 0.9A 0.8A 0.7A
Max. output current at 110V 1.5A 1.2A 1.0A 0.9A 0.8A 0.6A

In stock and shipping now!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. I immediately recognized this as my trusty Velleman universal PS, which I’ve been using for years. It’s awesome! A tank. Only con is it lacks 5v but everyone has spare USB or phone chargers now.

Sorry, the comment form is closed at this time.