May 31, 2013 AT 3:15 pm

Reading RFID Tags with the Raspberry Pi #piday #raspberrypi @Raspberry_Pi

tumblr_inline_mnnt5uOHhz1qz4rgp

Via Raspberry Kiosk:

This is the first guide (to date) that can be used by kids how to connect and use a RFID with the raspberry pi.

It has been a long time. I’ve been three months without writing here (afk for a while). Now I’m back and I joined a new makerspace (Made at Mob) that just opened here in Barcelona and I’m now committed to finish what I started: building an open source kiosk with the raspi. And now I’m done working at home, I can finally play with stuff while surrounded by amazing people and things.

tumblr_inline_mnnv8454PX1qz4rgp

I’m back with an exciting tutorial that will teach you how to read RFID tags with the raspberry pi. This opens new horizon to what we can do with our tiny little cheap friend.

This is guide is divided in 2 parts :

  • Part 1: Wiring things up
  • Part 2: Configuring the raspi

Check out the full guide here!


Featured Adafruit Products

364_MED

PN532 NFC/RFID controller breakout board – v1.3 – The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and ‘act’ like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you’ll want to use! (read more)


Check out all the Circuit Playground Episodes! Our new kid’s show and subscribe!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground”Adafruit’s Apps!



No Comments

No comments yet.

Sorry, the comment form is closed at this time.