May 23, 2013 AT 4:00 pm

Replicape Revision A2 Updates for BeagleBone Black #3dthursday

Replicape 2D

Check out this BeagleBone Black update of the 3D printing-friendly Replicape Beagle Bone cape project from Hipster Circuits:

There it is, the new revision of Replicape. This revision is more compatible with the new BeagleBone Black that has a built in eMMC. There are a lot of other changes as well on this revision. The most important is the moving of the stepper motor  connectors to the outside of the receptacles so removing is no longer necessary. Furthermore there is no need for a separate 12V and 5V power supply. You can now power the whole board with a single 12 to 24V PSU. Other things to mention is a major upgrade to the tracks and connectors for the heater cartridges and heated build platform, the addition of a fuse and finally a new color so that there will be no doubt which BeagleBone this belongs to : )

I’ve gotten a lot of help from Dirk Eichel on this revision, especially on the fat power tracks, the addition of a freewheeling diode across the MOSFETs to suppress voltage spikes and grips to reduce noise on the ADC lines.

Although there are a lot of nice changes, there has also been a lot of work put into keeping the cost down. The total cost of the board is the the same (BOM is ~$90).

I’ll give it a couple of days to get input from the community both on bugs in the layout/schematic and feature requests. Have a look at the RevA2 tag of the repository.

Read more.


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!


Check out all the Circuit Playground Episodes! Our new kid’s show and subscribe!

Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground”Adafruit’s Apps!



No Comments

No comments yet.

Sorry, the comment form is closed at this time.