April 25, 2013 AT 6:00 am

How to make 3D Printed Lithophanes #3dthursday

LithophaneExperiment2

Lately on Thingiverse, thanks to Cymon and pp3dpNL, there have been a number of fun printed lithophanes projects appearing. Here is a post from Cymon’s blog about how to make them for yourself!

I have been having a blast figuring out lithophanes and working out how to best make them. I think I’m going to start offering custom lithophane services in the store, which technically means I shouldn’t give away how I’m making them… but that’s not the sort of guy I am.

First thing I discovered is the local dollar store sells nightlights that I can print a holder for that will illuminate the lithophanes really well.

Another things I discovered was about thickness. From left to right (1) the source picture (my daughter), (2) white at 3mm thick, (3) tan at 3mm thick, (4) tan at 2.5mm thick. I thought I needed to make it thicker so I could have more color depth. Since I print these laying down I only get as many shades as I have layers. And sure enough if I want more layers I have to print in white, the tan just doesn’t let enough light through. But after comparing them side by side I really prefer the sepia-tone look of the tan ones. The white looks better in the picture, but in real life the tan is just superior. And at 2.5mm thick I’m getting about 16 layers, so that’s enough color for anything.

If you would like to make your own just follow these steps:

  1. Download BMPtoIGES
  2. Choose a source image with good contrast.
  3. Scale the picture to about 800×600 (the more pixels the more points in the final mesh the harder to process)
  4. In BMPtoIGES load your picture
  5. Set your edgecolor to black (so the holder has something to hold on to)
  6. Enter the following settings:

    NewImage

  7. File->Save and Process, choose STL and save your file
  8. Import the STL in Blender or your favorite mesh editing program
  9. Scale the STL by 50% in the Z only (I suppose you could change the 75 to 150 and just scale in all directions by 50%)
  10. Slice and print (I like to lay mine down. That works pretty well in my experience)

The Z-scaling is because I don’t think BMPtoIGES likes decimals in its boxes. 

I’m really surprised at how easy the process is… once I figured everything out. There was a lot of experimentation to get here, but in the end I’m fairly satisfied with the results. So don’t let my suffering be in vain and enjoy making your own Lithophanes.

Read more.

Related

No Comments

No comments yet.

Sorry, the comment form is closed at this time.