Replicating a 19th Century Statue with 21st Century Tech #3dthursday

Pleiads comparison

Check out David Huerta’s write-up “Replicating a 19th Century Statue with 21st Century Tech” over at the Brooklyn Museum blog, and follow through to the full article for details of the challenges he has faced experimenting with photogrammetry tools for creating digital models of real-world sculptural pieces:

My first exposure to the world of 3D printing took place in 2009 approximately 500 feet under the Earth’s surface in a former missile silo in the Washington state desert. There, three founders of a new Brooklyn-based 3D printer company hosted a workshop on building a 3D printer kit as part of Toorcamp, a nerdy version of Burning Man. At the end of the kit’s 4-hour assembly we printed out some tiny jewelry boxes. At the time 3D printing seemed to me like a novel technology for hackers with lots of potential, but not one I had any specific use for. Four years later, that use was found.

Museum sculptures are an interesting case in accessibility; they exist in a place the public can access but usually aren’t allowed to touch. Most sculpture materials aren’t too smelly or noisy so that limits the sensory experience to sight. However, not everyone has the ability to see, and although special exemptions are occasionally made to allow the visually impaired to touch some sculptures, you can only feel so much of a large object.

Sight includes the ability to expand the size or detail of what you’re looking at by moving closer or further away from the object. This isn’t possible in the two-dimensional web, so the paradigm of pairing a “thumbnail” image with a full-size counterpart became an established method for having both a high-level and up-close view of things. With similar constraints in mind, we’ve utilized 3D scanning and printing to create a “thumbnail” for large sculptures which can be used as a tactial maps of the object’s entire shape.

So how do you go from marble masterpiece to plastic replica? Like 3D printing, 3D scanning has also recently broken out of the expensive-equipment-for-expensive-professions world and into the much more afforable world of hobbyists and institutions with modest budgets. AutoCAD’s 123D Catch is a free download which was launched last year as a way to create 3D models from photos using stereophotogrammetry, which basically means taking a bunch of photos from different angles and letting software figure out how far away stuff in one photo is from stuff in the next….

Read more.

123dcatch windows 600px


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.