NEW PRODUCT – HDMI/VGA/NTSC/PAL Display – 10.1 Diagonal – 1280×800 IPS. Yes, this is an beautiful bright 10.1″ TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 10″ diagonal and is a ‘raw’ display as is used in a tablet, ultra thin with some mounting tabs around the edge. We include a driver board with HDMI, VGA and Composite inputs. The display is very easy to use – simply connect the included 9VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports. Voila, a display!
There’s a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tried to auto-detect which input you have and switches to that one or you can ‘select’ from the menu which to display.
To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI or SECAM.
For use with a Raspberry Pi we suggest editing config.txt to set “hdmi_safe=1″ output for best results (otherwise, the Pi may not ‘recognize’ the HDMI display and revert to composite output)
A 9V US-prong power adapter is included. The power supply may vary from the one shown in the photo, but it will definitely have a US 2-prong plug and will be a switching supply that can be used with 110-240VAC. We also powered it with 12V and it worked fine, and it might work at 5V.