“Make Your Own PCB” Class @ Zahn Center NYC on April 6th

MakeYourOwnPCB

If you are in the New York City area and have been looking to gain the skill to manufacture your own PCBs for the projects you are developing — perhaps on your way to launching a brand new kit or product — then check out the Zahn Center’s upcoming PCB making classes:

WHEN: April 6, 2013 @ 10:00 am – 6:00 pm

WHERE: Zahn Center, Room B20, Steinman Hall, 140th Street and Convent Avenue, New York, NY 10031

COST: $150 (plus fees)

Our first “Make your own PCB” class will be given by PCB designer extraordinaire, Jonathan Hirschman. In this class we’ll be helping you design and build your very own Arduino clone, similar to the one shown. The class is designed for everyone, of all skill levels, with no knowledge of electronics required – just a desire to learn and make.

The class will be given in two Saturday sessions (April 6th and April 20th, from 10am – 6pm). In the first session, you’ll learn about PCB design software, and then you’ll create your own Arduino clone design, and send your design out for fabrication. Two weeks later, you’ll be building and assembling your boards!

Even though this class is newbie friendly, we’ll be doing a pretty deep dive. You’ll learn how to read datasheets, how to design components in the layout software, power and ground planes, even how to make funky graphics. Want skulls and flames on your clone? No problem! We’ll also talk about the different manufacturing shops out there, pricing, location and what are some of their pros and cons. In the second session you’ll learn all about assembly and mounting, and how to correct when the tiny legs on your microntrollers don’t quite line up….

Read more.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.