We shared a Raspberry Pi care package with the folks over at Metalab (thanks to Marius Kintel for the suggestion!), which is timely because they are right now doing a number of exciting projects with RasPi, including a prototype for an authentication system for their “lazzor,” and a 24×24 RGB matrix with the RasPi as the network interface (strip controlled by a teensy). And the talented Wizard23 created an exciting project that he worked with Overflo to turn into a product for their Hackerspaceshop store! Here’s the beginning of the project documentation over at the Metalab wiki. (And here is the code.)
The metalab received a Raspberry Pi care package from Adafruit, and because we really dig blinky things we made a WS2801 controller for the Raspberry Pi.
It’s a simple shield that you can attach to your Raspberry Pi that functions as a bridge from Raspberry Pi to control a wide variety of WS2801 based LED strips and Pixelmodules at different voltage levels.
You can make your things go blinky from python or C/C++ without the need of a separate microcontroller.
It uses the internal /dev/spi0.0 provided by the Linux Kernel to talk to the Bridgemodule.
And because this is awesome, we made a kit out of it that you can purchase for 10,- on the hackerspaceshop.com
Each Friday is PiDay here at Adafruit, be sure to check out our posts, tutorials and new Raspberry Pi related products. Have you tried the new “Adafruit Raspberry Pi Educational Linux Distro” ? It’s our tweaked distribution for teaching electronics using the Raspberry Pi. But wait, there’s more! Try our new Raspberry Pi WebIDE! The easiest way to learn programming on a Raspberry Pi.
We now have Raspberry Pi Model B with 512MB RAM in stock and shipping now!
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
Sorry, the comment form is closed at this time.