Kickstarter Death Star Opposed By Rival Attempt To Fund Open-Source X-Wing Squadron #makerbusinessmonday #makerbusiness

RebelAllianceVsDeathStar

There are currently two competing projects out there that are changing the face of crowdfunding as we know it. The first is a citizen effort to create a civilian version of a tremendously powerful militarized space station (the petition put forward to the White House for such an item was rejected) — with a promise that it not be capable of destroying planets at this time. The latter, calls for the production of a fleet of military aircraft to use in the eventuality that the former crowdfunding initial effort breaks the no-planet-destroying-death-ray promise.

Yes, we are talking Star Wars, and yes these are actual real-world crowdfunding efforts currently underway, though both are tens of millions short of being funded at present. But the existence of these projects brings up an interesting question. Crowdfunding has been successfully implemented in the past many times to support the production of products that are by nature satirical and whimsical, or as in the case of The Oatmeal/Funny Junk fight as a parody stunt to raise awareness of what an artist felt was poor behavior on the part of a content hosting business on the Internet. But what happens when these platforms are used to crowdfund the production of real world versions of imaginary machines, and are successfully funded when the idea is really popular even when the project itself is evil-mad-scientist-grade bonkers?

Well, these projects won’t be funded — that’s part of the joke — but it does cause one to wonder what would happen if every Star Wars true believer (and everyone who thinks it might be funny to support the funding of a science fiction solution to a real world problem) pitched in. While there are no end to stories of crowdfunding efforts whose producers cannot deliver the proposed project, what if a crowd of really smart folks from the Adafruit community got together and…well…followed through?

Here’s a fun write up from Huffington Post that draws together a bit of the story behind these projects:

The original ‘open source’ Death Star Kickstarter was itself started in response to the White House’s denial of a 35,000-strong petition to build the unimaginably powerful space station on the grounds that it did not support blowing up planets.

“In November 2012 the people asked for a death star. The government said NO! In light of continuing threats we should build it ourselves,” the Death Star project’s leaders said.

Gnut.co.uk are asking for £20 million, as the down payment on an eventual bill of around £542 quadrillion.

They add that their design would include enough chicken wire to stop any attempt to destroy it in the manner achieved by Luke Skywalker in the Star Wars movies.

But their protestations of building the weapon for the common good were not accepted by all, leading to the creation of the open-source Rebel Alliance and their project to build an X-Wing.

They said:

On Feb 5, 2013, www.gnut.co.uk, whom we believe to be a subversive tactics unit of the evil Galactic Empire, launched a Kickstarter campaign to crowdsource a Death Star. At first, we laughed.
When we stopped laughing (because it kind of hurt, how hard we were laughing) we realized that it was an ingenious plot by the Empire to use the power of the people against us!

We can’t let this new Death Star go unchallenged, so we’re raising funds to form a new Rebel Alliance and construct a fleet of proton torpedo armed X-Wing fighters to take down this new Death Star.

So far they have raised just over £100,000 – and add that one of their future updates will include “iPhone and Siri integration”.

Both projects remain unfunded as of press time.

Read more.


Each week on the Adafruit blog we post up about amazing companies, people and articles about being a MAKER and a business. Over the years we’ve shared how we run Adafruit, published code from our shopping cart system and given presentations on running an open-source hardware company. Every Monday we’re going to try to collect some of these resources and tag them #makerbusinessmonday & #makerbusiness. They’re in our popular Maker Business category as well, enjoy!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.