Augmented Vision Eyepatch #WearableWednesday

 lilypad-eyepatch

Gregory McRoberts writes:

Like thousands being born without 3d vision, I want to experience distance. I thought I have a hearing aid so why not a seeing aid?

What would it look like if I were to make a device that allowed me, or the user, to experience visual information in a new way? Distance and heat seemed to be likely candidates. Safe from oncoming objects and fires or heat sources like machinery. I thought an infrared heat sensor is accurate enough and an ultrasonic distance sensor that would be relevant at a personal body distance of about 5 feet.

There are two considerations for this section, first being the personal aspects and the second being the social ramifications of wearing a Borg-like device.

I am personally comfortable wearing the device as my vision allows for it. I found others who looked through the device found the light to be too bright and distracting. The light can be further defused but more importantly what happens is something the military has coined “helmet fire.” Essentially helicopter pilots who use a wearable computer screen with inflight information being broadcast in one eye and real world vision in the other get confused easily in the heat of combat with the brains ability to process two images at once and can briefly shut down causing the helicopter to crash. It is a real problem. My limited vision lends me well to this technology but the signals need to be very deliberate hence the choice and sequence of colours listed bellow.

Blue light is connected to the thermal sensor and is on when a temperature of 80f or lower is detected. The blue light turns red when above 80f is detected. I used this number, as room temperature won’t set it off. It loves the stove and after some time you can map out the heat in the air with it! It will pick up a hot cup of coffee or body heat at close range of 2-3 feet.

The green LED flashes according to distance so the closer the object the quicker the flashing, simple enough but effective.

Socially wearing the device is another story. Of course here at OCAD-U it I easily accepted and met with great curiosity and fanfare but in public people don’t understand what it is. Hearing aids are well accepted for their sleek, tight form factor so that I am sure is a huge part of why people are uncomfortable with it. I have been asked most of all if the device is recording them. It has no camera or the capability to record any of the incoming information. But just like a hearing aid it provides what is missing and gives the wearer new information in a usable way.

Via Shannon Henry on Pinterest


Flora breadboard is Every Wednesday is Wearable Wednesday here at Adafruit! We’re bringing you the blinkiest, most fashionable, innovative, and useful wearables from around the web and in our own original projects featuring our wearable Arduino-compatible platform, FLORA. Be sure to post up your wearables projects in the forums or send us a link and you might be featured here on Wearable Wednesday!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.