Helpful post about how to prep your RasPi for access for when you don’t have the outboard monitor/keyboard/mouse to work with, via Interlock Rochester:
Ok, so there’s no duct tape, toothpicks, or bubble gum involved, but I thought it’d be helpful to document a handy way to tinker with your Raspberry Pi, even when you’re almost completely lacking in the required external paraphernalia.
We recently had Rob Bishop from the Raspberry Pi foundation stop by Interlock and give a workshop for a couple of hours, and as we scrambled to prepare — attempting to pull together 20 hdmi monitors, 20 usb keyboards, 20 power supplies, et cetera — I kept thinking that it’d be nice to be able to play around with a Pi even if you’ve arrived unprepared for such an event. So what follows is “how to fiddle with the Pi GUI with just your laptop, an ethernet cable, and a micro USB cable”. We’re going to start with a freshly imaged SD card, hook it up to a Mac or Ubuntu laptop through their internet sharing capabilities, and use VNC to share the GUI over the network.
Each Friday is PiDay here at Adafruit, be sure to check out our posts, tutorials and new Raspberry Pi related products. Have you tried the new “Adafruit Raspberry Pi Educational Linux Distro” ? It’s our tweaked distribution for teaching electronics using the Raspberry Pi. But wait, there’s more! Try our new Raspberry Pi WebIDE! The easiest way to learn programming on a Raspberry Pi.
Want a FREE RASPBERRY PI? All orders over $350 get a FREE Raspberry Pi Model B with 512MB RAM!Related
Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps!
No comments yet.
Sorry, the comment form is closed at this time.