NEW PRODUCT – HDMI/VGA/DVI Display – 7 Diagonal – 1080×600 @Raspberry_Pi #raspberrypi

Window-389
NEW PRODUCT – HDMI/VGA/DVI Display – 7 Diagonal – 1080×600. Yes, this is an adorable small HDMI television! We tried to get the smallest possible HDMI/VGA display with high-res, high-contrast visibility. The visible display measures only 7″ (17.8cm) diagonal, and the TFT comes in an enclosure with HDMI, VGA and DVI inputs. The display is very easy to use – simply connect the included 12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports. Voila, a television display! There’s some little buttons on the front that let you enter a menu system for adjusting brightness, color and contrast. It auto-detects which input you have and switches to that one or you can ‘select’ from the menu which to display. It does not come with a stand but there are four ‘mounting thread’ holes in the back in a 75mmx75mm square and you can use three M4 screws (one hole is not used) to attach it to an enclosure.

Window-1-238
To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or DVI output. It will not work with a device that only outputs NTSC/PAL/SECAM or any other ‘analog’ signal.

Window-2-118
For use with a Raspberry Pi we suggest editing config.txt to set “hdmi_safe=1” output for best results (otherwise, the Pi may not ‘recognize’ the HDMI display and revert to composite output)

Window-3-25
A 12V US-prong power adapter is included we also powered it with 9V and it worked fine.

  • Power with 9-12VDC only
  • 700mA power draw at 12V
  • 16:10 display ratio
  • Resolution: 1024 x 600 (can display up to 1920×1080)
  • Visible area: 152mm x 91mm 16:10
  • Brightness: 350cd/m2
  • Contrast: 400:1
  • Auto-detects between VGA, HDMI and DVI
  • Display plastic case dimensions: 190.5mm/7.5″ x 114.3mm/4.5″ x 38.1mm/1.5″
  • Weight (excluding power cable): 290g/10.2oz

In stock and shipping!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.