BACK IN STOCK – Adafruit Pi Cobbler Breakout Kit for Raspberry Pi

Window-247

Window-248

Adafruit Pi Cobbler Breakout Kit for Raspberry Pi. Now that you’ve finally got your hands on a Raspberry Pi® , you’re probably itching to make some fun embedded computer projects with it. What you need is an add on prototyping Pi Cobbler from Adafruit, which can break out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header onto a solderless breadboard. This mini kit will make “cobbling together” prototypes with the Pi super easy.

Window-1-144

The Pi Cobbler mini kit comes with a 26 pin ribbon cable, a custom PCB, ribbon cable socket and header pins. A little soldering is required to put it together but its really easy, even a beginner can do it in 15 minutes so please click to read the tutorial Once soldered together, the cable plugs between the Pi computer and the Cobbler breakout. The Cobbler can plug into any solderless breadboard (or even a prototyping board like the PermaProto). The Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it.

Window-2-79

Please note, this kit only contains a 26 pin ribbon cable, a custom PCB, ribbon cable socket and header pins. A Raspberry Pi, breadboard, breadboarding wires, cables, components, case, power supply, etc is not included! We do stock many of those items in the shop, so check those out as well!

What is the Raspberry Pi® ? A low-cost ARM GNU/Linux box.

The Raspberry Pi® is a single-board computer developed in the UK by the Raspberry Pi Foundation with the intention of stimulating the teaching of basic computer science in schools. The design is based on a Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and 256 megabytes of RAM. The design does not include a built-in hard disk or solid-state drive, instead relying on an SD card for booting and long-term storage. The Foundation plans to support Fedora Linux as the initial system software package/distribution, with support for Debian and Arch Linux as well – Wikipedia.

Raspberry Pi® is a trademark of the Raspberry Pi Foundation.

In stock and cobblering now!

Img 46501
Also check out “Raspberry Pi E-mail Notifier Using LEDs – A basic project to control LEDs with a Pi”.

Filed under: Raspberry Pi — by adafruit, posted July 11, 2012 at 3:49 pm


Try Adafruit's new iPhone & iPad app for makers! Circuit Playground! "Incredibly handy for anyone working in electronics. Perfect for engineers and non-engineers alike."
Looking for engineers, makers and the builders of dreams? Try our Adafruit job boards.
Join our weekly Adafruit SHOW-AND-TELL at 9:30pm ET every Saturday night! Then at 10pm, ASK-AN-ENGINEER with Ladyada and the Adafruit team!

No Comments

No comments yet.

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

www.flickr.com
adafruit's items Go to adafruit's photostream
www.flickr.com
items in Adafruits More in Adafruits pool