Resistor Helper – Papercraft Resistor Calculator!

Papercrafts at Adafruit! We’re excited to share this Resistor Helper you can download and make yourself. It’s the newest tool in our Circuit Playground family– when you can’t get to your iPhone or iPad, use paper! One side helps you read 4-band types and the other side takes care of 5-band types. The Resistor Helper is on Thingiverse as a PDF (with Illustrator editability preserved). Designed by Adafruit with Matthew Borgatti. You can also grab the PDF on github.

Read on to learn how to put it together!

Print out your Resistor Helper in color. It’s sized to fit on one 8.5″ x 11″ sheet.

The wheels are paired with small arrows. Cut around the holder and separate your wheel pairs from each other.

Cut out and glue pairs of colored wheels back to back.

Liquid glue can make the paper curl a bit, so we recommend drying the wheels under a heavy book (or warm laptop) for about an hour. Or you can use a glue stick!

Line up your colored wheels by the letters and numbers – 4a is the first wheel on the 4-band side, for example. Keep track of your pieces because we’re about to cut out the ID numbers!

Use a craft knife to carefully cut out the viewing windows in the holder.

Double check your windowed holder against your row of wheels so you still remember where they go.

Now carefully cut out the inner circles on your wheels, placing each one back in line before cutting the next one.

Of course you can always refer back to this page if you forget which wheel is which!

Cut small slits over the red dots on the holder (both sides = 8 cuts). This is where the paper fasteners will anchor each wheel.

Shorten the tabs on four paper fasteners with a pair of clippers.

This is optional but we think it looks nicer!

Use a ruler to gently score (but not cut!) the fold line on the holder.

The holder folds easily and neatly after scoring.

Pierce a paper fastener through a tab on one side of the holder and through a wheel.

You can assemble the Resistor Helper with either side as the “front,” but we think you’ll use the 4-band side more often.

Pierce through the opposite side of the holder and flare out the tabs on the fastener to secure.

Repeat with the other three wheels.

Once you’ve verified you assembled the wheels in the right order, carefully glue the corners/edges together of the holder.

That’s it! Use and enjoy! Tutorial also on Instructables and Make: Projects.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



6 Comments

  1. That’s so cool! You could also look into using button snaps/eyelets to secure the wheels.. should be available at most any craft store: http://www.bombayharbor.com/productImage/Snap_Button__Eyelet___Rivet/Snap_Button_Eyelet_Rivet.jpg

  2. Whoa, quick flashback to 1970 building my StarRoamer short wave receiver. It had one of them in the kit to be able to tell the resistors apart. It was great to have made things easier to figure out.

    Nice papercraft, thanks!

  3. It would be really cool if you would sell it, as I don’t want to go trough all the effort of building it.

  4. Really neat. I think I remember seeing them at Radio Shack year and years ago.

  5. @plecharts, I think they do sell it, just happens to be an iOS app available through the appstore. 😉

  6. I immeditately went back to the 70’s as well.

    http://www.stevenjohnson.com/cardboard/index.htm

    “there is a slide rule” for that was king in the mid-late 20th century.

Sorry, the comment form is closed at this time.