NEW PRODUCT -Circuit board necktie Resistor – Olive with gold ink, narrow

Window-27

NEW PRODUCT -Circuit board necktie Resistor – Olive with gold ink, narrow. Resistor. Super detailed resistors and capacitors oh my! How can you resist? Impress any nerdy guy or girl: computer scientist, programmer, electrician, engineer or maker. Is dad, grandpa, boyfriend or husband a tinkerer with solder and blinky things? Perfect for groomsmen and brides boys of the geeky persuasion. Nerd power!

Circuit board necktie “Resistor” – Olive with gold ink, narrow. 100% Polyester microfiber necktie.

This print extends very high up on the tie, approx. 18″ (46 cm) from the bottom point; perfect to be seen from under a vest or jacket. The tie is made of a soft microfiber, having almost the same hand as real silk and is printed with high-quality, non-toxic, water-based ink. The tie is available in narrow, 58″ long. All new materials! For reference, narrow is 2.75-3″ wide at it’s widest point.

We’re excited to print a limited run of ties printed from vintage circuit board patterns. This is the 7th in the series from Bethany “Toybreaker” Shorb, CEO of Cyberoptix, no circuit bored here. (ha!). We have covered Behtany’s amazing work on Adafruit for years, so we wanted to start carrying her designs. They go perfect with the iCufflinks!

This print extends very high up on the tie, approx. 18″ (46 cm) from the bottom point; perfect to be seen from under a vest or jacket.

It appears these were for appliance controls (particularly ovens and cook-tops) in the late-80’s. When fabricating actual circuit boards, silkscreens are used to print etch-resistant inks on to the board to protect the copper foil. Subsequent etching removes the unwanted copper and one is left with the desired copper pattern for conductivity.

LIMITED EDITION! As is the nature of vintage screens, once these screens die, that’s it.

The tie is made of a soft microfiber, having almost the same hand as real silk and is printed with high-quality, non-toxic, water-based ink. The tie is available in narrow, 58″ long. All new materials! For reference, narrow is 2.75-3″ wide at it’s widest point.

Cyberoptix only prints with high-quality water-based inks. They’re invaluable for the health of their shop, the environment, and they perform much better on delicate fabrics. Water-based inks have a much softer hand on fine fabrics and will never crack over time as Plastisol inks (the industry-standard for large-run shops). Not to worry, our water-based inks are as or more durable than harmful solvent-based inks.

Microfiber is Vegan-safe and our most common finish – why not exclusively silk? Many who choose not to consume animal products for ethical, dietary and religious reasons are concerned about the silk industry and wear nothing derived from living things. In the interest of not being exclusionary, they have decided to carry ties in synthetic microfiber. As dry cleaning is not always an option, this makes the synthetic finish far easier and more practical.

Want to learn more behind the process of making their vintage circuit board ties? See the video interview/studio visit with Make Magazine!

In stock and shipping now!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.