16×32 RGB LED Matrix — Alt High Performance Library
Phil Burgess went all demo-scene on us and made a super optimized RGB matrix panel library that supports multiple panels. It uses much more RAM but in exchange, its got great refresh, color depth and low CPU usage. If you have a panel check it out! 16×32 RGB LED Matrix — Alt High Performance Library. Phil writes –
What we’ve got here is a library for the 16×32 RGB LED Matrix that achieves both better refresh rates and lower CPU usage — producing steadier images and allowing more processing time for your own code. It also handles tiling of multiple panels, and the bit depth (maximum number of colors) is configurable. That’s the good news.
The bad news…as previously mentioned, it’s tied to a very specific hardware configuration. It relies on a few dirty tricks (or as a friend of mine says, “things that would get you an ‘F’ in a programming class”), and my concern is that the timing might be so delicate as to require tweaking if someone’s using even a different version of the compiler. So I’m hoping there might be a couple willing guinea pigs…
Bring a little bit of Times Square into your home with this 16 x 32 RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. They have 512 bright RGB LEDs arranged in a 16×32 grid on the front. On the back there is a PCB with two IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the display with a 1:8 scan rate.
Keep in mind that these displays are designed to be driven by FPGAs or other high speed processors: they do not have built in PWM control of any kind. Instead, you’re supposed to redraw the screen over and over to ‘manually’ PWM the whole thing. On a 16 MHz arduino, we managed to squeeze 9-bit color (512 colors) with 50% CPU usage but this display would really shine if driven by an FPGA, CPLD, Propeller, XMOS or other high speed multi-core controller. The good news is that the display is pre-white balanced with nice uniformity so if you turn on all the LEDs its not a particularly tinted white.
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.