Google’s open accessory development kit on standard Arduino hardware

B7J5O8

Google’s open accessory development kit on standard Arduino hardware, not confirmed but seems like it should work…

A lot of people have been put off by the price of the reference hardware kit, which is roughly $390. What’s worse, they appear to be sold out until end of May, and Microchip’s cheaper ($80) alternative doesn’t arrive until July. So instead of waiting I decided to write a guide on how to get an ADK-capable Arduino for about $55.

Since the ADK reference design is based on Arduino and Oleg Mazurov’s excellent USB host shield, it stands to reason that we should be able to build our own hardware kit from these components. I already had these parts lying around from my work on MicroBridge, so I decided to ‘port’ their code, which in reality means just changing a couple of pin definitions.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



4 Comments

  1. And there’s the Arduino Pro Mini version too:

    http://www.circuitsathome.com/products-page/arduino-shields

  2. Any bets on how long it will be before a Kinect is attached to one of the Arduino based interfaces?

  3. I am stuck wondering why people would want to tie an android device to an Arduino via USB especially when the dev kit is soo expensive. Most Android phones have blueooth and wireless/networking which is a far nicer way to do things in my opinion.
    Using Google App Inventor I have made proof of concept devices that have used either bluetooth to control a simple RGB LED or my personal favourite uses a Ethernet shield and a few other components to remotely control my air conditioner over the net.
    The code is at best embarrassing but it works for my uses I am sure someone with more experience would make what I have done in a much cleaner and simpler way.
    http://ai.kittywolf.net/index.php/BTArduinoLED1
    http://ai.kittywolf.net/index.php/AutoAircon

  4. Ok so I just got around to watching the video with the full details. I see how the API/ADK has much more abilities then I thought.
    Ok now I want one.

Sorry, the comment form is closed at this time.