October 22, 2010 AT 1:24 pm

BACK IN STOCK – Teensy (ATmega32u4 USB dev board) & USB Game pad pack

Teensy Lrg

We put these back in stock today, the were taken out during some crazy PS3 hack that have have now blown over.

The Teensy is a complete USB-based microcontoller development system, in a very small footprint! All programming is done via the USB port. No special programmer is needed, only a standard “Mini-B” USB cable and a PC or Macintosh with a USB port.

Key Features:

  • USB can be any type of device
  • AVR processor, 16 MHz
  • Single pushbutton programming
  • Easy to use Teensy Loader application
  • Free software development tools
  • Works with Mac OS X, Linux & Windows
  • Tiny size, perfect for many projects
  • Available with pins for solderless breadboard

Comes with assembled Teensy board (ATmega32u4 with bootloader preinstalled) and header to allow easy breadboarding. We suggest using AVR-gcc (like WinAVR) with the LUFA library or ‘Teensyduino’ Be sure to check out the multiple resources available at PJRC!

Get’em now in the Adafruit store!



Adxlstick
This project tutorial will show you how you can convert a console game pad into a USB keyboard mouse for playing games on your PC. The USB game pad can be used with nearly any software, such as a MAME emulator, game, simulation software, or for custom user interfaces. We’ll start by turning the buttons of the game pad into keyboard buttons, so that pressing ‘up’ is converted into the ‘U’ key, for example. The firmware is easily adaptable, so you can adjust it for whatever software it will be used with. Then we’ll make the project more interesting by adding an accelerometer. This will allow the game pad to be used as a mouse by tilting it! This tutorial including the original code and Portal video is by Devlin Thyne! Rock!

You’ll need the following in order to build the project:

  • Game pad – We’ll be using an SNES controller
  • Teensy – This is a very small microcontroller board that can act as a keyboard/mouse
  • Triple-axis accellerometer – We’ll be using the nice ADXL335 on a breakout board. You can skip this if you’re not planning to add in the mouse capability
  • USB cable with mini-b connector – to attach to the Teensy for plugging into a computer!
  • Ribbon cable – for all the soldering connections. Rainbow cable is the easiest to work with as its color coded

Pt 2788
If you want to build the entire project, we have a project pack in the shop with all the parts listed above!

You’ll also need some basic hand tools such as screwdrivers, wire strippers, soldering iron, solder, diagonal cutters, vise or third hand tool, etc.

All the code is on GitHub, including some extra sketches we’ve written so be sure to look there!

Read the entire tutorial here!

Related

No Comments

No comments yet.

Sorry, the comment form is closed at this time.