This “Old Pick and Place” – We make a tray for our pick and place for TQFP chips


This “Old Pick and Place” – We make a tray for our pick and place for TQFP chips – they usually cost $500, we made our own for under $50.

Parts list on the wiki!


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



5 Comments

  1. Hi Limor! I must say that this is a really awesome item. Having a PnP one day keeps me up at night (just like 3D printing did).

    What would you judge to be the hardest part of developing a complete pick-n-place machine (open source, of course)? I’ve printed and built 3 RepRap’s, know how to work with a laser cutter, co-developed the Ultimaker.com and I know how to write firmware for 3D printers and the like.
    Of course a programmer would say that the mechanics are difficult, and a mechanical engineer would say that the software or electronics are difficult. So maybe you can name a few ‘challenging’ parts for each domain?

    I’m not trying to get the most accurate and fast system from the get go. I want it to be “good enough”, much cheaper and easier to customize and expand to arising unknown use scenario’s.

    Would it be ambitious or just crazy to try to develop a PnP that can be built for under 1K in parts? I think it should definitely be possible and that such a system has obvious benefits in terms of hackability and important DIY OSHW implications.

    Erik

  2. We use 80/20 in the lab I work at, and we’ve found the ideal cutting tool to be a swivel band saw, such as http://www.amazon.com/Horizontal-Vertical-Metal-Cutting-Band/dp/B000FVEDUM/ref=pd_cp_hi_3 I know that this is a little size-impractical for you, but as a recommendation for other people (or organizations) attempting this sort of project, it’s easier than a hacksaw, and if you are using 80/20 for a lot of things, the time saved quickly adds up.

  3. use Contraptor;

  4. first off love the name of the show, secondly, i thought that tray that she put the holder on was used to hold the PCB’s, or is there another tray for them? or do they go next to the tray for the QFP’s?

  5. Erik,
    building a PnP yourself is one thing I’m dreaming of too.
    And I don’t think it is so terribly complicated. You need a precise cartesian robot, but given you do not have to move heavy weights, that shouldn’t be a mechanical problem. Compared to a 3D printer you need a good picking system and a way to rotate parts.
    The rest is software. More complicated than a 3D printer as you probably need a feedback system with computer vision. But still no magic.

    Let me know if you ever want to tackle this project. I’m a software guy (but built a 3d printer too), so maybe I can help.

    Andreas

Sorry, the comment form is closed at this time.