The Bulbdial clock from Evil Mad Scientist is probably the coolest clock idea I’ve ever seen. Even cooler are my parents, who got the kit for my birthday. The basic idea is that three rings of LEDs cast shadows onto a clock face to form H/M/S hands, somewhat like a sundial, with the hands slowly animating around. A lot of thought clearly went into making this kit, and it’s very nicely done, but there’s a major drawback: I want to use it on my bed side table, where I usually keep a clock, but it’s too bright for me to fall asleep! Of course, that’s been thought of too: in the normal view mode, the three buttons at the bottom of the clock are brightness up, down, and “mute,” which turns off the LEDs entirely. But they’re hard to get to buried underneath the frame of the clock, and it makes muting the display cumbersome in the dark. Let’s fix that!
The Bulbdial Clock kit is based on an original design concept from IronicSans.com and developed at Evil Mad Scientist Laboratories. It works like an indoor sundial, but with three shadows of different length. You tell the time just like you do on a normal clock, by reading the positions of the hour, minute, and second hands.
The Bulbdial we are carrying comes with red, green and blue LEDs for the ‘hands’, a black/smoke laser-cut enclosure and a wall adapter. When finished, it looks like the picture shown above!
The Bulbdial Clock is sold as a soldering kit [?]. Basic electronic soldering skill is required, and you provide basic soldering tools: a soldering iron + solder and small wire clippers. You will also need internet access to read or download our detailed assembly guide. No additional knowledge of electronics is presumed or required. Easy “through-hole” construction and clear, photo-heavy instructions are provided. Assembly time: 1-3 hours, depending on your level of experience with soldering.
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.